Size Name:Total Shaft Length 3/4 in
This is a big bonus of a clock movement with 3 pack stylish clock hands kit from EMOON. You can pick out the style and size that look best to keep your favorite clocks running at no additional charge. The "AA" battery powered high torque motor allows you to make the giant wall clock of your dreams. With EMOON clock hands amp; mechanism combo that provides quick and easy fix for your clock, you can also be a clock maker. Save an expensive clock and repair the old clock with Emoon clock mechanism kit. Now, it is running again in your house with wonderful memories.
Material: Plastic, Brass and Aluminum.
Shaft Diameter: 3/8 in.
Threaded Shaft Length:7/16 in.
Overall Shaft Length:3/4 in.
Style1 Hour/Minute Hand Length (from the center of the hole to the end): approx.(2 1/4)/(3 3/8) in
Style2 Hour/Minut/Second Hand Length (from the center of the hole to the end): approx.(2 3/4)/(3 7/8)/(3 7/8) in
Style3 Hour/Minute/Second Hand Length (from the center of the hole to the end): approx.(3 5/8)/(4 7/8) /(4 5/8) in
Second Cap Nut: 1/4 in
Case Size: 2 1/4 in L x 2 1/4 in W x 5/8 in H
Second Hand Motion: Sweeping
Battery: One 1.5V AA Carbon battery (not included)
1 x EMOON quartz clock movement
3 x Minute hand
3 x Hour hand
2 x Second hand
1 x Second cap nut
1 x Rubber gasket
1 x Brass washer
1 x Brass hex nut
1 x Metal hook
1 x Mounting hook
1 x User manual
- The hour and minute hands had a protective plastic coating that needs to be carefully removed.
- Be careful not to bend the hands with too much pressure.
- Please do not use Alkaline battery, rechargeable battery, or they will damage the movement.
- Do not tighten the brass hex nut too tight
- Press hard to get all clock hands in place